The Vulcan Arms V47 series rifles are manufactured in the USA and are copies of the famous AK-47 rifles. These rifles feature brand new US made barrels, furniture and fire control, US made stamped receivers, and are built using US made and Bulgarian made parts. Each rifle comes in a hard case with a high cap magazine, sling, and manual.
|
The Vulcan Arms V47-210 uses the same basic action as the V47-200 but with an upgraded sighting system. Peep sights are installed on the top cover and the gas chamber has been replaced with a combination front sight/gas chamber. This sighting system greatly improves user accuracy.
|
|
V47 ACCESSORIES
The three pictures shown above are of standard AK style rifles with some of our more popular accessories, which are listed below.
1. The top picture shows an AK with our AV47-114 folding stock, AV73-127 pistol grip, AV47-109 top cover with tactical sight, AV73-126 ambi bolt carrier, AV47-110 gas block, AV47-116 straight gas tube, AV73-123 carry handle, AV73-124 handguard, AV47-111 selector with bolt catch, and AV47-118 muzzle brake.
2. The middle picture shows an AK with our AV47-114 folding stock, AV73-127 pistol grip, AV47-109 top cover with tactical sight, AV47-110 gas block, AV47-116 straight gas tube, AV73-123 carry handle, AV73-108 ARM handguard, AV47-111 selector with bolt catch, and AV47-118 muzzle brake.
3. The bottom picture shows an AK with our AV47-115 fixed skeleton stock, AV73-127 pistol grip, AV47-109 top cover with tactical sight, AV47-110 gas block, AV47-116 straight gas tube, AV73-125 handguard with tactical rail, AV15-106 vertical fore grip, AV47-111 selector with bolt catch, and AV47-118 muzzle brake
|
|
1. AV47-106 - US Made hammer for V47 -
Made from SAE 8620 steel and heat treated for long life. Semi auto,
The finest you can buy. 2. AV47-108 - US Made disconnector for V47 - Made from SAE 8620 steel and heat treated for long life. Semi auto, the finest you can buy. 3. AV47-107 - US Made trigger for V47 - Made from SAE 8620 steel and heat treated for long life. Semi auto, single hook. The finest you can buy. |
 |
1. AV47-100 - US made stock for V47 -
Injection molded from glass filled nylon, complete with butt plate only,
black. Fits stamped receivers. 2. AV47-100G - Same as #1 but green. 3. AV47-102 - US made handguard for V47 - Injection molded from glass filled nylon, black. 4. AV47-102G - Same as #3 but green. 5. AV47-104 - US made pistol grip for V47 - Injection molded from glass filled nylon, black. 6. AV47-104G - Same as #5 but green. 7. AV47-103 - Gas tube cover for V47, black. 8. AV47-103G - Same as #7 but green. |
 |
1. AV47-109 - Top cover with adjustable
sight for V47 - Aperture rear sight installed on standard top cover.
Adjustable for windage, flip for short or long range. 2. AV47-110 - Gas block/sight - This unit replaces the standard gas block and front sight. Fits standard .595" diameter barrels. |
 |
1. AV47-112 - Bolt catch with spring. This ingenious device installs in the receiver and, when pushed up by the operator, holds the bolt in the open position (it is NOT a last shot hold open, it must be manually pushed). Installation requires cutting a slot in your receiver. |
 |
1. AV73-126 - Ambi bolt carrier. This carrier features a Galil like knob which allows manipulation by either hand. Carrier only, no gas piston. |
 |
1. AV47-114 - Folding stock. For
Pre-ban AK's. Folds left, tubular steel construction with Delrin
block. 2. AV47-115 - Fixed stock. As above but welded into the open position for use on post ban AK's |
 |
1. AV47-116 - Straight gas tube. Used in our V47-210 series for a unique look. |
 |
1. AV47-111 - Bolt catch with bolt hold open feature. A standard AK selector with a cut that retains the bolt and carrier to the rear. |
 |
1. AV47-118 - Muzzle brake, AK74 style,
14-1mm LH threads 2. AV47-119 - Muzzle brake (not shown) same outside dimensions as AV47-118 but with an ID of .725" for welding onto Saiga rifles. 3. AV47-117 - Muzzle brake, V47-210 type, 14-1mm LH threads. |
 |
1. AV73-123 - ARM handguard retainer with carry handle. Fits Galil and stamped receiver AK's, for use with our "Galil style" hand guards. |
 |
1. AV73-108 - ARM hand guard. Fits Galil or stamped AK rifles. Requires rear retainer. Cut for Galil bipod. |
 |
1. AV73-124 - Galil hand guard. Fits Galil and stamped AK style rifles. Requires rear retainer. |
 |
1. AV73-125 - Tactical Galil hand guard. Fits Galil and stamped receiver AK's. Requires rear retainer. |
 |
1. AV47-113 - Tactical hand guard. AK74 style hand guard with tactical rail. Fits stamped receiver AK's or milled (with minor fitting) |
